VIAIR 280c 2.5 Gal. Compressor Kit-152db "BEHEMOTH-i" Train Horn

Free Shipping for this Behemoth -I Train Air Horn with Viair 150psi Air System. The best kit available.
Click To Enlarge
  • Item #: ACHRSK-663-280c-2.5G-VAL
  • Manufacturer: A.P. / VIAIR Corporation
  • Manufacturer's Product Number: ACHRSK-663-VIAIR280c-2.5G
  • Condition: New

Assured

Assured Performance Products
BEHEMOTH-i Triple Trumpet Train Air Horn
VIAIR 280c 150psi Light Duty 2.5 Gallon Kit
*FREE SHIPPING*

Check Out our Video Below.
Actual Horn in the FORD EXCURSION-See Video.

CLICK HERE TO WATCH ON YOUTUBE
Of course this video does not do justice to just how loud this 152db Behemoth Train Horn really is!!
Perfect for Large Cars, Trucks and SUVs.
Great for RVs, OHV and Big Rigs.
The trumpets are removable from mounting plate.
This Horn is SO Loud it will Shake the Ground.
This Air System can be mounted in any position.
The trumpets can be configured to fit most vehicles.
The Viair 2.5 Gallon Air System easily can mount in car's trunk..
..the bed of a pickup or UTV..
..or even storage hold of RV.
Can also be mounted under vehicle as well.
This Air System is considered a underbody kit.
This Viair Air System can also be used for emergency tire inflate of small tires, air lockers, air springs, etc.
We give you options for compressor upgrades.
Quick and Easy Install.


Behemoth-i Air Horn Specs:
Part# ACHRSK-663
DB: 152 @ 10M(150psi)
Solenoid(Electric Air Valve): Included (12v/24v).
Trumpets: 3
Trumpet Diameter: 6.25''
Trumpet Lengths: 12.3'', 14.5'', 16.6''
Overall Dimension: 18.75'' Long x 16.1'' Wide x 6.5'' Tall
Trumpet Material: CHROME Plated Zinc(non-corrosive)
Mounting Hardware: Included
*Mirror Finish-Trumpets will look like new for years to come.
*Trumpets can be removed from mounting plate for custom installs.
*Inline Trumpet Mounting
*Can fit these trumpets in tight areas like behind a bumper.
*Oversized Hi-Flow Air Solenoid.

VIAIR Compressor Kit Specs:
VIAIR 280c Compressor
150psi (30% Duty @ 100psi).
Duty Cycle Explained-CLICK HERE
12 Volt
Amp Draw: 16 amps.
Stainless Steel valves and Bearing.
Min./ Max. Ambient Temp: -40F. / +158 F.
Includes 1/4'' Stainless Steel braided feeder line.
Nickel Plated Inline Check Valve.
Compressor Dimensions: 7.8'' L. x 3.95'' W. x 6.35'' H.
2.5 Gallon Tank - 1/4" NPT Ports(x6)
Air Tank Dimension: 23.5"L. x 6.0"W. x 7.5"H.

This On Board System Includes:
*30 amp Relay.
*Pressure Switch (110psi ON / 145 psi OFF)
1/4 NPT M x 1/8" NPT F Reducer
1/4" NPT M x 1/4" Tube Comp Fitting
1/8" NPT M x 1/4" Tube Comp Fitting
1/4" NPT M Plug(x2)
175psi Safety valve
*20 Feet Air Lines Tubing
*Nuts/ Screws/ Washers for Compressor and Tank
*Complete Instructions.
*VIAIR 1 Year Warranty against Defects


2.5 Gallon Tank Fill Rate w/VIAIR 280c Compressor
0 to 105 PSI -----2 Min. 55 Sec.
0 to 145 PSI -----4 Min. 41 Sec.
85 to 105 PSI----0 Min. 44 Sec.
110 to 145 PSI-----1 Min. 36 Sec.

Need a LARGER, more Heavy Duty Compressor??
We have Compressor Upgrade Options.


This Behemoth-i Super Loud, earth shaking train air horn will get you noticed and will wake up inattentive drivers that share the road with you. The Behemoth-i Train Horn will work in cars, RV, SUV, Semi's and of course make for a great pickup truck air horn. The Trumpets can be removed from mounting plate. Installer can then reconfigure the trumpets into tight mounting areas of vehicle. This air horn has zinc trumpets that will not rust. The diaphragm housing are made of cast aluminum polished to a mirror finish. The Behemoth train air horn line is not for the average person, this horn is extremely loud.
This Viair light duty on board air system produces a whopping 150psi. The Viair 280c compressor is 30% Duty at 100psi. and is considered light duty. The 2.5 Gallon Tank is an air advantage when using this air system. Simply put, it will have more volume air in reserve. This Viair Kit is perfect for air supply for this horn, air spring kits or air lockers and even filling small tires with air. The kit includes the Viair patented air filter relocation kit. This way the 280c air compressor can be mounted under the vehicle and filter can be in a location that is clean. Ideal places for the air filter is in engine compartment or inside the vehicle cabin under a seat or under a bed rail is also ideal. This will extend the life of the compressor greatly. This Viair heavy duty kit includes a 110psi ON and 150psi OFF pressure switch which allows the air system to always maintain proper air pressure in the tank. This kit includes all the necessary fitting for install.
Purchase with confidence, we are an Authorized VIAIR DEALER.


You can use OE Horn Switch (steering wheel) to activate solenoid.
You don't want to use your OE Horn Switch??
Choose option to include Horn Button Switch.
OR
Do you want to Look and Feel like a Big Trucker???
Choose option to include Manual Air Valve Kit w/Lanyard

Assured Performance
CLICK HERE TO VIEW MANUAL VALVE KIT


Don't forget to get your Tire Fill Hose Kit
Choose 1 of 2 VIAIR Tire Fill Hose Kit options below:

The first of the two options (Yellow Hose Kit-Top of Pic Below) is Viair 35' Coil Air Hose and is 200psi rated. This kit includes a Female Quick Connect fitting and Male Quick Connect Studs(2). Also includes a tire chuck. (PN:ACV0037-KT)

The second of the two options (Digital Hose Kit-Bottom of pic) is the Viair Digital Tire Fill 30' Hose Kit. Includes Digital Tire gauge that reads 0-200psi. Also includes a canvas protective carrying case. (PN:ACV00044)
CLICK HERE for Digital Tire Fill Kit Info

Add A Viair Tire Fill Hose Kit and Save


A lot of installers prefer installing an air gauge for the on board air system. Add this gauge and save some money off buying separately.
This wiring kit includes gauge, on/off switch, 20 feet of 16g wire, 20 amp inline fuse, electrical connectors & zip ties.
Add A Viair Wiring Kit & Gauge and Save


This bracket will make mounting your compressor a little easier. You can weld or bolt this bracket to vehicles frame, then simple bolt the compressor to this bracket. This will save the installer a lot of install time.
Add A Viair Wiring Kit & Gauge and Save


Get a little more from this Behemoth horn when you upgrade to larger tubing & air valve(solenoid) and all the needed fittings. The larger tubing and solenoid allows more air volume means little louder the horn.
Upgrade to Large Tubing and HD Air Valve


*FREE SHIPPING!!!
*For Continental U.S. Shipments ONLY

  * Marked fields are required.
*
*
*
(+$39.90)
*
(+$39.90)
*
(+$84.90)
*
Qty*
Price $409.90
Availability In-Stock
Reviews (3) Write a Review
No Reviews. Write a Review